A Foreign Dredgers,Brand new

Obia/Akpor, Rivers Added via phone at 07:54, 6 November 2016, Ad ID: 1001501213

Offer from Business
 

FOR SALE !!!!

A FOREIGN DREDGERS ,BRAND NEW is Available for sale incase you have buyers.
General Specification.

> Predator 3000-18EL Cutter Suction Dredge.
> OVERALL

> The Predator 3000-18 is a dismountable, cutter head/suction dredge, designed for a wide variety of dredging applications. Following is a list of general components:

> 100. DREDGE HULL CONSTRUCTION.

> Center Hull Section
> Nominal Size: 40’ x 10’ x 5’

> Type Construction: Reinforced steel plate
>
> Plate thickness: ¼” thick bottom and sides, 1/2-forward and aft bulkheads
>
> Frames: 5”x 3” x 5/16” angle
>
> Frame Spacing: 24”
> Hull Side Sections: (assembled)

> Nominal Size: 75’ long x 6’ wide x 5’deep (Extended from 70’ Standard)
>
> Plate thickness 1/4-inch
>
> Stiffeners: ¼” x 5” flat bar
>
> Appurtenances: Lifting lugs, watertight hatches each compartment.
> Spuds
>
> 20” diameter tapered section heavy wall pipe, 60’
>
>
>
> Dredging Ladder
>
> Length: 60-Ft. (Extended from 52’ Standard)
>
> Type Construction: Reinforced structural steel and plate
>
> Swing Block Size: 12-inch
>
> Lifting sheave: 12-inch, 4-part
>
> Trunnion pin size: 5-inch
>
> Paint
>
> All immersed exterior surfaces are sand blasted and coated with prime and finish paints. All other exterior surfaces are hand cleaned and coated with two prime coats and two finish coats of industrial alkyd enamel. Internal surfaces receive one prime and one finish coat.
>
>
>
> 200. SUPERSTRUCTURES
>
> Control room is 8’ x 10’, insulated, and air conditioned with roof top 13,800 BTU combination marine heating cooling unit. Includes port and starboard personnel doors, and tinted glass windows.
>
> Controls are traditional lever style for convenience of operation. Proportional hydraulic valves are actuated by hydraulic pilot circuits.
>
> Engine room is 16 gauge carbon steel with access doors at each ladder. Engine room includes removable panels
>
> 300. MACHINERY
>
> Dredge Pump
> Brand new, Pearce 18” x 18” Series T46WD Heavy Duty Dredge Pump, or equal….
> Suction diameter: 18-inch
> Discharge diameter: 18-inch
> Impeller diameter: 46-inch
> Coupling
> Dodge Para Flex
> Marine Gear
> Twin Disc Gear, heavy duty marine gear with 3.53 to 1 ratio. Hydraulically controlled, includes integral clutch, and raw water heat exchanger cooling.
>
> Main Power
>
> Brand New Caterpillar Industrial Diesel Engine, Model C-32, including.
> 1000 BHP Industrial “A” Rating at 1,800 RPM
> Export service, no Tier rating, Electrical Controls
> Turbo Charged with after cooler
> Electric Starter
> Heat Exchanger Cooling
> Auxiliary Power
> Brand new Caterpillar Industrial Diesel Engine, Model C-9, including.
> 325 BHP Intermittent “C” Rating, at 1,800 RPM
> Export Service, no Tier rating, Electric Controls
> Turbo Charged with After cooler
> Electric Starter
> Heat Exchanger Cooled
>Service Water Pump
> Make: Berkley, or equal, 4” x 3”, Belt Driven off of Auxiliary Engine
> Model: 150B
> Size: 3” x 2-inch
> 400. HYDRAULIC MACHINERY
> The auxiliary engine drives the hydraulic pumps through a Durst Pump Drive. Three separate hydraulic circuits provide power to the cutter drive, swing winches, the ladder winch and the stern spud cylinders. Proportional hydraulic valves with electronic controls operate all major systems. High efficiency filters are located in the high pressure lines to protect machinery and controls.
> Hydraulic Pump Drive Gear: Durst, Single input, multiple out put
> Hydraulic Pumps: Gear Tek Gear Type
> Swing Winches: (2) Planetary style winches, hydraulic powered
> Line pull rating: 18,000-lbs. SLP
> Ladder Winch: (1) Planetary style winch, hydraulic powered
> Line pull rating: 18,000-lbs. SLP
>
> Controls
>
> Pressure compensated proportional valves, with electric over hydraulic control and operation
>
> 500. CUTTER SYSTEM:
> 600 Steel Frames
> 700 Electrical
> 900 Miscellaneous
price&delivery: we will design fabricate deliver and commission one pioneer 3000-18 custom cutter suction DREDGE as described.

The OLX app is available for:
Android and iPhone

A Foreign Dredgers,Brand new Obia/Akpor - image 2
A Foreign Dredgers,Brand new Obia/Akpor - image 3
A Foreign Dredgers,Brand new Obia/Akpor - image 4
 Share via Email
Views:189

Contact advertiser

All Ads of this user

User Ads Ide

Mercedes Benz C320

Mercedes Benz C320

Mercedes-Benz

3 Dec

₦ 2,750,000

Negotiable
Range Rover Sport HSE

Range Rover Sport HSE

Land Rover

3 Dec

₦ 13,000,000

Negotiable
Nissan primera

Nissan primera

Nissan

3 Dec

₦ 1,500,000

Negotiable
Honda Accord

Honda Accord

Honda

3 Dec

₦ 950,000

Negotiable
Lexus GX460

Lexus GX460

Lexus

3 Dec

₦ 13,000,000

Negotiable
Show other Ads of this user
₦ 1,974,000,000 Negotiable
Send message
Obia/Akpor, Rivers Show on the map

Ide On site since Sep 2016 See their other ads Ide has verified:

  • Mark as Favourite
  • Print
  • Edit
  • Report