1.Easy to use, compact and lighter than manual pump, just plug into your car cigarette
lighter for power.
2;Also inflates balls , bicycle tyres , boats , pools, etc. Just slip on the appropriate
universal adapter over tyre valve and you are ready to go. Inflates tyres, rafts & sports
equipment, fast and easily.
3.Pressure checking gauge for easy measurement.
- When use it, please start the car engine to enhance power, don't consume car battery power.
- The machine only can be used by DC 12V/15A power, don't use it with domestic high voltage 24V, 36V, 110V, 220V.
- When pump the tire, please stop for cooling purpose after working for continuous 10 to 15 minutes. When pumping the rubber dinghy, it can work continuously for 30 minutes.
- For general tyre, it can reach 206 KPA normal tire pressure in 2 to 3 minutes, but for big tyre, it may need longer time.
- After starting aeration, if the instrument pointer rapidly rise, it may indicate that the air wasn't filled into tire, at that moment, it should be stopped and restarted, otherwise, instrument and the motor will be damaged. - When using the air compressor, you'd better pay attention to tire pressure in case that the tire was supersaturated.
- Keep the vehicle's cigarette lighter receptacle clean and fuse connected, otherwise the compressor can not work.
- This item should avoid damp, heavy cast and sand mud invasion; please keep the child from playing with it.
It is equipped with pressure checking gauge.
- Maximum inflatable pressure can be up to 250 PSI.
- Use the car cigarette lighter power for fast filling.
- The barometer can measure and display the pressure accurately.
- This item can commonly pump the tire to normal pressure in 2 to 3 minutes.
- Portable, necessary on vehicle. - Easy to use, just plug into your car cigarette lighter for power, slip universal adapter over tire valve and you are ready to inflate.
- Ideal for car and bicycle tires, sports balls, airbeds and inflatable toys.
1. Plug power cord into DC 12V the cigarette lighter receptacle.
2. Start up the engine and turn on the switch.
3. Push connector of the pump toward air value of the tyre, and screw up.
4. The gauge will indicate the pressure of the tyre when it's aerating.
5. Pay attention to the pressure gauge, usually you can stop after 2 to 3 minutes(comes to 206KPA).
Working Voltage: DC 12V
Flow Quantity: 35 L/MIN
Maximum Pressure: 250 PSI
Fits: All cars
Continuous working time: 15 minutes
Aeration Time: the tire can achieve normal pressure in 2 or 3 minutes
Maximum Power: 90W
Product Size: 125 x 56 x 118 cm
Package Size: 165 x 65 x 120cm